Push the switch for fire and ambiance, while audible feedback confirms commands and ensures safe functioning. This simple switch is designed for wall placement.

Models: IntelliFire™ Plus RC150-HNG

Features: on/off, battery strength indicator, battery backup, cold climate mode

A large LCD screen and simple navigation provide easy operation. Feel confident knowing alerts and notifications will appear when needed. The RC400 acts as a thermostat and can be used as a remote, or docked on the wall.

Models: IntelliFire™ Touch RC400

Features: on/off, flame height adjustment, fan speed, lights adjustment, thermostat mode, room temperature readout, child lock, timer mode, battery backup, cold climate mode, power vent, wall docking station
Fan, lights and power vent are dependent on your fireplace.

Mesh front with clean face trim

Available Finishes:

• 

  Black

• 

  Graphite

• 

  Fog Gray

• 

  New Bronze

• 

  Ebony

• 

  Stainless Steel

Angle trim frame with color-matched mesh frame

Available Finishes:

• 

  Fog Gray

• 

  New Bronze

• 

  Graphite

• 

  Ebony

Complement your flame with the optional Fade-Resistant Reflective Black Glass that displays exceptional angles of the contemporary ribbon of flames spreading across the length of the firebox.

Draw heat from your fireplace to another room in your home, up to 20 feet away. When a heat zone kit is run continuously, it can redirect up to 25% of the heat to another area, also reducing wall temperatures above the fireplace. Two heat zones run continuously will redirect up to 50% of the total heat output.

Bring the warmth from your fireplace to the rest of your home, up to 20 feet away. Place TV 12” above fireplace. No mantel required.

*NOTE: The SmartWall fan will and must run continuously to move the heat away from the area above the fireplace.
Also minimum guidelines must be followed:
- Minimum of 3" gap between the TV and wall at all angles
- Minimum of 24" to side wall
- Ambient room temperature 75° F or less
- See TV manufacturer's recommendation for TV operating temperatures
- Minimum 60" from the top of the fireplace opening to the ceiling

Brings the warmth from your fireplace to the rest of your home, by redistributing heat from the fireplace via the furnace ductwork. When a heat duct is run continuously, it can redirect up to 25% of the heat to another area, also reducing wall temperatures above the fireplace. Two heat ducts run continuously will redirect up to 50% of the total heat output.

Fireplaces aren’t just for exterior walls. A fan-powered accessory with slim venting can zigzag throughout your home—up, down, over or under – making it possible to install a gas fireplace virtually anywhere. This ensures safe fireplace operation and the best flames. Check with your local hearth professional to determine if your home or fireplace could benefit from power venting technology.

Draw heat from your fireplace and direct it outside, up to 25 feet away. When a Heat Out kit is run continuously on high, it can redirect up to 40% of the heat off the fireplace, also reducing wall temperatures above the fireplace.

This rugged cap is built to withstand high wind speeds, without sacrificing drafting or safety.

Use this multipurpose cap to finish off any Direct Vent gas fireplace or stove. Shrouds are also available to blend with siding materials or for enhanced safety.

This cap is ideal for adverse weather conditions in multi-unit, high-rise buildings.

This termination cap is designed to complement distinct stone and stucco exteriors.

This decorative, paintable shroud easily blends with exterior siding and provides a secondary safety barrier for heated exhaust.

Use this safety shield to cover an existing termination for added protection in high-traffic areas.